User's Guide

199
Switch module
When you click the [Detail] button on [Switch Module List] window, the following screen appears.
Each tab represents the installed slot.
Click the tab to switch the switch module which you want to view the detailed information.
The displayed data consists of the general and device information from top to bottom.
The general information includes the name and size of the switch module, the STATUS LED,
Electrical state, Operating status, CPU fault status, temperature status, and ID LED status and the IP
address of the management feature of the switch module.
Click [ON] or [OFF] button on the line of ID LED to operate the ID LED of the selected switch
module.
When you click the [HTTP] button, the Web page for management of the selected switch module
opens in separate window.
When you click the [telnet] link, the command line console for the selected switch module opens in
separate window.
CHECK:
 The [HTTP] button is not displayed if the management LAN interface of the switch module
does not support the web feature. In addition, if the telnet feature is not supported, clicking the
“telnet link” only opens another window. The command line console for the switch module is
not displayed.
 For more information about management feature of the switch module, refer to the User‟s Guide
of the switch module.
TIPS:
The telnet link feature may be disabled depending on the OS of management console or configuration
of Web browser. With Internet Explorer Ver. 6 of Windows XP and Mozilla FireFox 2.0, it is
confirmed that the telnet feature is available by the default setting.