User's Guide

229
6. Anti trap lost report:
Specifies either “enable” or “disable”.
If you receive an EM card-transmitted SNMP trap at the NEC ESMPRO Manager, the NEC
ESMPRO Manager responds with the receipt completion to the EM card. “Anti trap lost” means to
enable EM to confirm that the trap reached to the destination by receiving a receipt; if there is no
receipt, retry the trap transmission to prevent the trap from a loss.
IMPORTANT:
Anti trap lost is effective only when you receive the SNMP trap at the NEC ESMPRO Manager.
The following functions are available only when you enable the Anti trap lost feature.
7. Result port:
Specifies the port number to receive the trap receipt from the NEC ESMPRO Manager.
The default value is “5002”. No need to change the value normally.
8. Location information:
Specifies the location information composed of maximum 64 ASCII characters.
The default is “unknown”.
9. Contact name:
Specifies the contact name composed of maximum 64 ASCII characters.
The default is “unknown”.