User's Guide

230
Others
Specify the time to automatically turn off the backlight of SIGMABLADE monitor. Use this page to
specify the external syslog server used to transfer the EM syslog.
 Backlight off timer of SIGMABLADE Monitor:
Specify the time in seconds.
 Syslog server support:
Set this item to “Use” when transferring the EM syslog to external syslog server.
The default setting is “Not use”.
 IP address of syslog server:
Specify an IP address of external syslog server when “Use” is specified for “Use syslog server”.
The default value is “0.0.0.0”.
TIPS:
To transfer the syslog of EM to external syslog server, be sure to start the syslog server before the
EM. If the syslog server is not started when EM attempts to write syslog into syslog server, the syslog
command is aborted and no syslog is collected.