User's Guide

239
Apply
Select the file and click the [Run] button to transfer the update data file to the EM card. The selected
file is updated.
IMPORTANT:
Updating by this feature is performed to EM card being connected. If the updating is executed from
the Web console of the active EM, the firmware of active EM is updated. It is recommended to
execute updating from the Web console of standby EM.
In duplex EM card configuration, execute updating of second EM card after updating of first EM card
is completed.
After updating, the EM card is rebooted automatically.
In duplex EM card configuration, the active EM is switched to another EM card by switchover
feature if the updating is executed on the active EM.
If only one EM card is installed, a bridge feature and SNMP feature are stopped while rebooting.
Accordingly, the connection via management LAN of CPU blades and switch module is temporarily
disconnected. In addition, system monitoring by NEC ESMPRO Manager is temporarily disabled. If
a timeout error occurs, connect them again after the EM has rebooted.
The screen as shown below is displayed while update process is in progress.
TIPS:
The on-screen information is not updated automatically. To view the latest information, click the
[Reload] button.
When update process is completed and the EM card is rebooted, this screen is no further displayed
even though the [Reload] button is clicked.