User's Guide

242
Chapter 5
SIGMABLADE Monitor
This section explains how to use the SIGMABLADE monitor.
Components of SIGAMABLADE monitor
The SIGMABLADE monitor is composed of LCD, buttons, and LEDs. Various features are activated
by pressing the button and provided in menu format.
LED indication
When the EM card is connected and opened normally, the EM card controls LED indication.
LED name
Indication
Description
Power LED
On (green)
Goes on green when the Blade Enclosure is powered on.
Off
Goes off when the Blade Enclosure is powered off.
Status LED
On (green)
Goes on green when the Blade Enclosure is powered on
and all the modules work normally.
On (amber)
Goes on amber when any of modules is faulty.
On (red)
Wait for a while. When diagnostic test completes, the
LED goes on green.
Goes on red when a fatal error occurred. This LED goes
on red when the Em card is not connected properly or is
not operating normally. Check LCD indication.
ID LED
On (blue)
Goes on blue when the [ID] button is pressed or the
command to turn on the ID LED is issued from the remote
console.
Off
Goes off when the [ID] button is pressed.
Power LED