User's Guide

252
When you select [4: Set PASSWD] on [EM CONFIG] Menu, the screen as shown below appears to
set a password.
Press [↓] or [↑] button to increase or decrease the number at the cursor position in the range
between 0 and 9.
Press [→] or [←] button to move cursor horizontally.
Press the [Enter] button to determine the setting you have made.
Press the [Menu] button to return to the Main Menu.
When you select [5: Enable Password] on [EM CONFIG] Menu, the screen as shown below appears
to select whether to enable or disable the password.
button to move cursor horizontally.
Press [→] or [←] button to move cursor horizontally.
Press the [Enter] button to determine the setting you have made.
Press the [Menu] button to return to the Main Menu