User's Guide

260
Backup of EM Firmware
Creates a backup file of EM firmware in the USB memory connected to the USB port of the Blade
Enclosure.
When you select [3: Backup FW] on [EM Firmware Sub] menu, the confirmation message as shown
below is displayed.
Press [→] or [←] button to move cursor horizontally to switch selection between “Y” and “N”.
To cancel backup, put the cursor on “N” and press the [Enter] button. The screen goes back to [EM
Firmware Sub] menu without changing the setting.
To execute backup, put the cursor on “Y” and press the [Enter] button.
If the old backup file exists in USB memory, the confirmation message as shown below appears.
Press [→] or [←] button to move cursor horizontally to switch selection between “Y” and “N”.
To cancel backup, put the cursor on “N” and press the [Enter] button. The screen goes back to [EM
Firmware Sub] menu without changing the setting.
To execute backup by overwriting the current firmware, put the cursor on “Y” and press the [Enter]
The following screen is displayed while backup is being executed.
Upon completion of backup, the LCD displays the results.
 When backup completed successfully:
 When backup failed: