User's Guide

263
Collecting logs
EM Log
Saves the log information of active EM in the USB memory connected to the USB port of the Blade
Enclosure.
When you select [6: Collect LOG] on the main menu, the [Collect LOG Sub] menu as shown below
appears.
Selecting [1: EM] starts collecting EM log.
If the old EM log file exists in USB memory, the confirmation message as shown below appears.
Press [→] or [←] button to move cursor horizontally to switch selection between “Y” and “N”.
To cancel log collection, put the cursor on “N” and press the [Enter] button. The screen goes back to
[Collect LOG Sub] menu without changing the setting.
To collect EM log by overwriting the current log, put the cursor on “Y” and press the [Enter] button.
The following screen is displayed while EM log is being collected.
Upon completion of EM log collection, the LCD displays the results.
 When log collection completed successfully:
 When log collection failed: