User's Guide

267
Setting OSD Hot Key
Set the hot key to activate the OSD feature.
When you select [1: Hot Key Sel] on OSD Setup Menu, the [Hot Key Select] menu as shown below
appears.
Indicates the current setting.
Press the [Enter] button to determine whether enable (ON) or disable (OFF) the hot key.
Press the [←] button to go back to the [OSD Setup] menu.
Press the [Menu] button to exit from the [OSD Setup] menu.
Item
Description
1:Ctrl × 2
Sets a hot key to press the <Ctrl> key twice.
Pressing this hot key activates the OSD simple mode.
2: CapsLK × 2
Sets a hot key to press the <Caps Lock> key twice.
Pressing this hot key activates the OSD simple mode.
3. Ct Al Sht
Sets a hot key to press the <Ctrl>, <Alt>, and <Shift> keys simultaneously.
Pressing this hot key activates the OSD menu mode.
4: Scroll × 2
Sets a hot key to press the <Scroll Lock> key twice.
Pressing this hot key activates the OSD menu mode.
IMPORTANT:
All the hot keys are enabled (ON) by the shipping default. When the optional server switch unit is
connected and you want to use the hot key on it, set hot keys so that they do not duplicate with
other hot keys. If any hot key is also used in an application program or others, select a valid key to
avoid collision.