User's Guide

269
Maintenance Menu
Displays a maintenance menu. You do not need to use this menu in normal case.
When you select [3: Maintenance] on OSD Setup menu, the Enter Passcode window as shown
below appears. If you have selected the [Maintenance] menu by mistake, press the [←] button to go
back to the [OSD Setup] menu.
Press the [Menu] button to exit from the [OSD Setup] menu.
Saving OSD Setup Data
If you have changed settings in [Hot Key Select] or [KB Setup] menu, the confirmation menu as
shown below appears when you exit from the OSD Setup menu.
Select [1: Yes] and press the [Enter] button to save changes and exit from the [OSD Setup] menu.
Select [2: No] and press the [Enter] button or [Menu] button to discard changes and exit from the
[OSD Setup] menu.
TIPS:
The settings saved here is retained even when the Blade Enclosure is powered off.