User's Guide

276
IMPORTANT:
 The [Rack Name], [Enclosure Name], and [Blade Name] are specified from the EM card. If the
EM card is not operating normally, the default value as shown below are displayed. In this case,
check if the EM card is operating normally.
Rack Name: Default_Rack_Name
Enclosure Name: Default_Chassis_Name
Blade Name: Blade-01 to Blade-16
 When the installed CPU blade occupies two slots (e.g., NEC Express5800/120Bb-m6 and NEC
Express5800/140Ba-10), the indications for [Blade Name] and [Power] of the slot to the right of
the installed slot remains unchanged (default value). In addition, the [Blade Control Menu]
described later is unavailable for the right slot.
Key operation
Key
Function
<↑><↓><←><→> key
Moves the cursor.
<Enter> key
Executes menu operation at the cursor position.
<Esc> key
Exits from OSD menu.
<N> key
Activates [Rack Control Menu].
<C> key
Activates [Enclosure Control Menu].
<F1> key
Activates [OSD Setup Menu].
<K> key
Moves cursor to [Slot1] in KVM selection field.
<D>, <U> key
Moves cursor to [Slot1] in DVD/USB selection field.
<B>, <S> key
Moves cursor to [Slot1] in Blade Name field.
Operation in Blade Selection Menu
Item
Description
KVM switching
Select one of the slot numbers among [Slot1] to [Slot16] using cursor
and press the <Enter> key. The KVM is connected to the CPU blade in
the selected slot.
Or, press one of the key <1> to <0>, <Q>,<W>, <E>, <R>, <T>, <Y>
(underneath the keyboard row of <1> to <6>) while the cursor is placed
in KVM selection field. The KVM is connected to the CPU blade in the
selected slot. (*1) (*3)
DVD/USB switching
Select one of the slot numbers among [Slot1] to [Slot16] or [EM]using
cursor and press the <Enter> key. The DVD/USB is connected to the
CPU blade or the EM card in the selected slot.
Or, press one of the key <1> to <0>, <Q>,<W>, <E>, <R>, <T>, <Y>
(underneath the keyboard row of <1> to <6>) while the cursor is placed
in DVD/USB selection field. The DVD/USB is connected to the CPU
blade in the selected slot. (*1) (*3)
Activating [Blade
Control Menu]
Select a Blade Name using cursor and press the <Enter> key to display
the [Blade Control Menu].
Or, press one of the key <1> to <0>, <Q>,<W>, <E>, <R>, <T>, <Y>
(underneath the keyboard row of <1> to <6>) while the cursor is placed
in Blade Name field. The [Blade Control Menu] for the CPU blade in
the selected slot is displayed. (*2) (*4)
Activating [Rack
Control Menu]
Select a Rack Name using cursor and press the <Enter> key or <N> key
to display the [Rack Control Menu]. (*2)
Activating [Enclosure
Control Menu]
Press <F1>to display the [OSD Setup Menu].
Activating [OSD
Setup Menu]
Press the <ESC> key to display the [OSD Setup Menu].