User's Guide

277
*1: When a blade is selected on KVM or DVD/USB switching menu, switching is performed
regardless of the status of the selected CPU blade. However, if you select the CPU blade slot
number currently being selected or EM card, it is ignored, connection is not switched.
If a CPU blade selected for KVM destination is off-powered, the OSD menu will be displayed by
the video generator built-in the Blade Enclosure. The resolution is fixed to 640×480.
*2: You will be prompted to enter the security password before displaying the menu.
*3: If NEC Express5800/120Bb-m6 or NEC Express 5800/140Ba-10 are installed, the slot selection
changes to the slot with smaller numbers even when you choose a bigger number. If you already
selected a Express 5800 120Bb-m6 or NEC Express 5800/140Ba-10, this switching is effective when
you specify a CPU blade number of a bigger slot and pressed Enter.
*4 If NEC Express5800/120Bb-m6 or NEC Express 5800/140Ba-10 are installed, specify a slot with a
smaller number, as the slots with bigger numbers are deemed as unmounted.