User's Guide

280
Blade Control Menu
To activate the [Blade Control Menu], use cursor to select the CPU blade name you want to operate
from the Blade Name field in [Blade Selection Menu], and press the <Enter> key. Or press one of <1>
〜<0>, <Q>, <W>, <E>, <R>, <T>, <Y> (underneath the keyboard row of <1> to <6>)
When activated, the password entry window appears. Enter the password. Then, the [Blade Control
Menu] appears.
If the control menu is protected by a password, a password entry window appears.
Use the keyboard to enter the password. If the entered password matches the registered password, the
control menu is displayed. If no password has been registered, press the <Enter> key with the password
entry field being blank. The control menu appears. If the entered password does not match the
registered password, the screen goes back to [Blade Selection Menu].
TIPS:
No password is registered at shipment. Set the password according to “Setting OSD password”
described later.
If the entered password does not match the registered password, the error message as shown below
appears.
Press the <Esc> key to go back to the [Blade Selection Menu].
When the [Blade Control Menu] starts, the window as shown below appears.