User's Guide

281
Press the <Esc> key to go back to the [Blade Selection Menu].
Menu Items
Item
Feature
1: Change Blade name
To open the Blade name input window, either select this option and
press [Enter], or press [1].
2: Press power button
To perform the equivalent of pressing the POWER switch on the
Enclosure Manager Card (EM Card), either select this option and press
[Enter], or press [2].
3: Press and hold power
button
To perform the equivalent of pressing and holding the POWER switch
on the Enclosure Manager Card (EM Card) for more than 4 seconds,
either select this option and press [Enter], or press [3].
4: Press reset button
To perform the equivalent of pressing the RESET switch on the
Enclosure Manager Card (EM Card), either select this option and press
[Enter], or press [4].
5: Press dump button
To perform the equivalent of pressing the DUMP switch on the
Enclosure Manager Card (EM Card), either select this option and press
[Enter], or press [5].
6: Press ID button
To perform the equivalent of pressing the ID switch on the Enclosure
Manager Card (EM Card), either select this option and press [Enter], or
press [6]
*1: The menu operations from [2] to [6] are managed by the EM card. If the EM Card is in
correctly connected or is not working, an error message is displayed.
IMPORTANT:
When the installed CPU blade occupies two slots (e.g., NEC Express5800/120Bb-m6 and NEC
Express5800/140Ba-10), the Blade Control menu is unavailable for slots with larger numbers; use
ones of the smaller. .
Indicates the slot number, status, and name of the selected CPU blade.