User's Guide

282
Changing CPU Blade names
Press [1] or select [1: Change Blade Name] and press [Enter] to open the Blade name input window as
shown below.
The current CPU Blade name is displayed in the window. Use the keyboard to enter a new name. Press
[Enter] to apply the change. If your input includes unavailable characters or is null (no name), an error
message is displayed. To cancel the change and return to [Blade Control Menu], press [Esc].
TIPS:
A CPU Blade name can contain the characters A-Z, a-z, 0-9, and - (hyphen).
The maximum number of characters for a name is 32. The following keys are available in this
operation.
Key
Function
[Enter] key
Applies the entered Blade name
[Esc] key
Cancels the entered Blade name
(Input is discarded and the name is not changed)
[←] and [→] keys
Move the cursor
[Insert] key
Switches between insert mode and overwrite mode
Insert mode: the cursor is magenta
Overwrite mode: the cursor is yellow
[Delete] key
Deletes a character after the cursor
[Back Space] key
Deletes a character before the cursor and move the cursor.
If the entered blade name contains unavailable characters, the following messages appears.
Press the <Esc> key to go back to [Blade Control Menu].
IMPORTANT:
Any change to a CPU blade name in a slot where there is no CPU blade is installed, or
which is the larger of the two slots occupied by a double-width CPU blade is ignored (the
default name is used).