User's Guide

283
Operating on a CPU blade
If you select one of menu items [2] to [6] in [Blade Control Menu], the corresponding operation request
to the CPU blade is sent to the EM card for execution.
[2: Push Power Button]
Performs the equivalent of pressing the POWER switch on the CPU Blade.
[3: Push Power Button and Hold]
Performs the equivalent of pressing and holding the POWER switch on the CPU Blade for 4 seconds.
[4: Push Reset Button]
Performs the equivalent of pressing the RESET switch on the CPU Blade.
[5: Push Dump Button]
Performs the equivalent of pressing the DUMP switch on the CPU Blade.
[6: Push ID Button]
Performs the equivalent of pressing the ID switch on the CPU Blade.
If the request to the Enclosure Manager Card (EM Card) is accepted, the following message appears.
Press [Esc] to return to [Blade Control Menu].
If the request to the Enclosure Manager Card (EM Card) is not accepted, the following error message
appears. Press [Esc] to return to [Blade Control Menu].
IMPORTANT:
If there is an error in the operation request to the CPU Blade, check that the EM card or the CPU
Blade is operating correctly.