User's Guide

289
Setting OSD Hot Key
When you select [1:Hot Key Select] on [OSD Setup Menu] using the cursor and press the <Enter>
key, or press the <1> key, the [Hot Key Select] menu as shown below appears.
Select the a menu number using the cursor and press the <Enter>, or press <1>, <2>, <3>, or <4> key
to change ON (enable) or OFF (disable) the hot key. Press the <Esc> key to go back to the [OSD Setup
Menu].
Item
Description
1: Hot Key (Ctrl x 2)
Sets a hot key to press the <Ctrl> key twice.
Pressing this hot key activates the OSD simple mode.
2: Hot Key (CapsLock x 2)
Sets a hot key to press the <Caps Lock> key twice.
Pressing this hot key activates the OSD simple mode.
3: Hot Key (Ctrl+Alt+Shift)
Sets a hot key to press the <Ctrl>, <Alt>, and <Shift> keys
simultaneously.
Pressing this hot key activates the OSD menu mode.
4: Hot Key (Scroll x 2)
Sets a hot key to press the <Scroll Lock> key twice.
Pressing this hot key activates the OSD menu mode.
IMPORTANT:
All the hot keys are enabled (ON) by the shipping default.
When the optional server switch unit is connected and you want to use the hot key on it, set hot keys
so that they do not duplicate with other hot keys.
If any hot key is also used in an application program or others, select a valid key to avoid collision.
If settings were changed, save confirmation is displayed when you exit from [OSD Setup Menu]. If
you select “No (does not save)”, settings are not changed.