User's Guide

291
Set OSD Password
When you select [3:Change Password] in [OSD Setup Menu] and press the <Enter> key, or press
the <3> key, “Enter Password” window as shown below appears.
Enter the current password and press the <Enter> key. If the entered password is accepted, the
window goes to Enter New Password window.
Press the <Esc> key to go back to the [OSD Setup Menu].
Enter a new password and press the <Enter> key. If the entered password is accepted, the window
goes to Re-enter New Password window. Press the <Esc> key to go back to the [OSD Setup Menu].
TIPS:
The following characters are available for password. „A‟ to „Z‟, „a‟ to „z‟, „0‟ to „9‟, and „- „ (hyphen).
Up to 15 characters can be registered.
Enter the new password once more and press the <Enter> key. If the entered password is correct, the
password is changed.
If the entered password is not correct or any unavailable character is contained in the password, an
error as shown below is displayed. Press the <Esc> key to go back to [Enter Password] window.