User's Guide

293
Operation in OSD Simple Mode
In OSD simple mode, you can switchover the KVM and set the Server Name Resident mode.
Activating OSD Simple Mode
Enter the hot key to start the OSD simple mode.
Setting of hot key can be changed in OSD menu mode or on the OSD Setup Menu of the
SIGMABLADE monitor.
 Select Hot Key
The following two hot keys are available to start the OSD simple mode. Quickly press the
<Ctrl> key twice, and then release. Quickly press the <CapsLock> key twice, and then release.
 Operation timeout
If the keyboard is not operated for about one minute or longer, the OSD simple mode is
canceled.
TIPS:
-During OSD simplified mode operation, OSD requires key board to be operated. Key board is
prohibited to use for the operating system installed in CPU blade. When the operation is required, exit
from OSD simplified mode. Mouse is available during OSD simplified mode.
-During OSD simplified mode operation, OSD menu mode is disabled. OSD simplified mode must
be quit when OSD menu mode is started