User's Guide

302
The screen is sheared or not displayed when switching KVM:
 Is the resolution correct?
→ Check the setting for resolution of the display unit or the CPU blade. Refer to
the User‟s Guide of the CPU blade or the display unit for details.
 Is the synchronization normal?
→ Check synchronization of display unit.
Refer to the User‟s Guide provided with the display unit.
 Is the display unit applicable to NEC Express server?
→ Use the display unit applicable to NEC Express server.
 Is the KVM connected with the CPU blade you are going to operate?
→ Check if the KVM is connected with the proper CPU blade using
the SIGMABLADE monitor or OSD menu.
 Is the power of the CPU blade connecting to the KVM?
→ Power on the CPU blade.
Pressing the hot key does not activate the OSD menu mode or OSD simple mode:
 Is the hot key disabled?
→ When you failed to activate the OSD menu mode, enable the host key using the OSD
Setup feature of the SIGMABLADE monitor.
 Is the keyboard connected to the keyboard connector on the Blade Enclosure?
→ Check the connection.
KVM cannot be switched over in OSD simple mode:
 Did you press the proper key?
→ Press one of the keys between <1> to <O>, <Q>, <W>, <E>, <R>, <T>, <Y> (the key row
under the keys 1 to 6).
→ When using a numeric keyboard, enable (turn on) the Num Lock feature, then press one of the
keys between <1> to <O>, <Q>, <W>, <E>, <R>, <T>, <Y> (the key row under the keys 1 to 6).
Cannot enter the desired character from the keyboard:
 Is the proper keyboard selected?
→ Select a proper keyboard in OSD menu mode or OSD Setup menu of the SIGMABLADE
monitor.
Nothing is displayed on screen
 Is the console powered on?
→ Confirm that power plug is connected properly.
 Is the screen suspended?
→ Confirm that software suspends the screen or not. Move a mouse or press shift key.
 Is brightness of the screen proper?
→ Adjust the brightness.
 Is the console connected LAN connector properly?
→ Check connection, if the console was LAN console.