User's Guide

31
Installation
Use the following procedure to install this product.
Locate an appropriate slot and insert an EM Card
by pushing its handle.
Removing an EM Card
Follow the reverse order of that for installation to remove an EM Card.
TIPS:
To remove an EM card, push the ejector on the handle.
TIPS:
 We recommend backing up the configuration of the EM card..
 For backup/restore procedure, see “Backup/Restore of Configuration File” described later.
IMPORTANT:
As long as
–no EM cards are installed, or
–an ACTIVE LED of EM card(s) is not lit after EM card is installed,
do not install or uninstall CPU blades, switch modules, fan units, power units and power cords.