User's Guide

35
Connection via Network Port
TELNET or SSH (password authentication) is used for connection with network. To login the EM card with
TELNET/SSH, use the IP address you have assigned previously in the procedure for connection via the serial
port.
NOTE: The default IP address is 192.168.1.8/24. You may connect with the local
network that accepts this IP address to set an IP address. Note that, however,
connection with network is aborted when you change an IP address. The
SIGMABLADE monitor described in Section 5 also allows you to set an IP address.
IMPORTANT: To connect with the management network, use "Management LAN
Interface" connectors at the front of the EM card.