User's Guide

65
Range specification
You need to specify the range of values for some commands.
You can specify a range of values by connecting two values with “-” (hyphen).
Enter a space between a value and „-‟ (hyphen).
Example: When specifying 1 through 9
“1 - 9”
You can connect multiple specifications by connecting them with „,‟ (comma).
Enter a space between a value and „,‟ (comma).
Example: When specifying 1 and 5.
“1 , 5”
URL specification
URL needs to be specified for argument in some commands.
Specify URL according to the following format.
(The range enclosed with double quotations „“„ is case sensitive. Type “tftp”, “ftp”, and “http” in
lower case.)
http specification : “http://<URL>/<path>“
ftp specification (Anonymous ftp) : “ftp://<URL>/<path>“
ftp specification (user/password) : “ftp://<username>:<password>@<URL>/<path>“
tftp specification : “tftp://<URL>/<path>“
* <path> should include the file name.
CPU blade number specification
* If the blade has multiple blade slots, specify the smallest slot number of them. (How to specify
the slot number depends on a module to be installed. In such a case, prioritize the descriptions of
the module or user‟s guide of the module.)
Prompt
The following shows prompt specification of a CLI.
“[The blade enclosure name]([login user name]) >Δ”
Description: The actual name of the information enclosed with brackets is displayed.
“Δ” represents a space.
EM card name : This is used to identify an EM card from another one. This is not
configured by default.
The blade enclosure name : The name of the blade enclosure
The login user name : User account name used for logging in to EM card
Example:
The following is a prompt when logging in to the blade enclosure named “Prototype” by a user
whose name is “Administrator.”
Prototype (administrator) >
EM firmware CLI prompt format (Example)