User's Guide

67
User account management
Overview
The CLI of SIGMABLADE-Hv2 EM firmware manages where a user can access.
The EM firmware supports the user account management commands for managing where a user
can access.
Default user
Default user is a user that can be used with no modification on the user management information.
For SIGMABLADE-Hv2, the following user is configured by default.
The list of default user
User Name
Description
Administrator
Administrator user
User account
You can create multiple users according to your system operating environment and request from
users.
The number of users has the upper limit.
For information on how to create an account, refer to “User management commands” described
later in this manual.
Access right
You can set the access right for controlling where the user that is created above can access.
The following three types are supported as access rights. Access rights are determined according to
privilege.
The list of specifiable access right
Access right
Description
ADMINISTRATOR
System administrator
OPERATOR
System operator
USER
General user
The CLI supports many commands, yet some commands are available only for certain users.