User's Guide

70
Command
Access
rights
Description
Default value
EM card
active/
standby
Back
up
target
Notes
ENABLE
TOPOLOGY
A/O
Enables InterBlade
Enclosures
connection
configuration.
Disable
A
Y
*3
DISABLE
TOPOLOGY
A/O
Disables InterBlade
Enclosures
connection
configuration.
Disable
A
Y
*3
User management control
ADD USER
A
Adds a use to the
system.
Up to 30 users can be
registered.
The user defined by
the system
(Administrator) can be
added.
Administrator
A
Y
*3
Registerable up to 30
uses including the
“Administrator”.
ASSIGN
[SERVER |
SWITCH]
A
Assigns access
permission to CPU
blades and switch
modules to the
specified user.
N/A
A
Y
*3
ASSIGN EM
A
Assigns access
permission to EM
cards to the specified
user.
N/A
A
Y
*3
DISABLE
USER
A
Disables a specified
user account.
The registered
user is set to
“ENABLE” by
default.
A
Y
*3
ENABLE
USER
A
Enables a specified
user account.
The registered
user is set to
“ENABLE” by
default.
A
Y
*3
REMOVE
USER
A
Deletes a specified
user.
N/A
A
N
*3
SET
PASSWORD
A/O/U
Sets the password of
the use who executed
the command. The
password must be 3
to 8 characters.
N/A
A
N
SET USER
CONTACT
A
Configures the
contact information of
the specified user.
The contact
information must be
up to 32 characters.
““
(unconfigured)
A
Y
SET USER
FULLNAME
A/O
Configures the full
name of the specified
user. The full name
must be up to 32
characters.
“Administrator
”: Full name:
System
Administrator
A
Y
SET USER
PASSWORD
A
Sets the password of
the specified user.
The password must
be 3 to 8 characters.
Only users with the
ADMINISTRATOR
rights can use this
command.
N/A
A
N
SET USER
ACCESS
A
Configures the access
rights for the specified
user. Access rights:
“ADMINISTRATOR”,
“OPERATOR” or
“USER”
Only users with the
ADMINISTRATOR
rights can use this
command.
Administrator:
“Admin”
A
Y
*3
SHOW USER
A/O/U
Displays a list of users
that are registered
with the EM firmware.
N/A
A/S
N
UNASSIGN
[SERVER |
SWITCH]
A
Removes the access
permission to CPU
blade and switch
modules from the
specified user.
N/A
A
N
*1|*2