User's Guide

73
Command
Access
rights
Description
Default value
EM card
active/
standby
Back
up
target
Notes
SET SNMP
TRAPACKPO
RT
A/O
Specifies the port
number for receiving
SNMP TrapAck.
Specify the port
number by a decimal
number.
“5002”
A
Y
*3
NEC ESMPRO Manager
is available by default.
SHOW
NETWORK
A/O/U
Displays the network
settings.
Display Items:
IP address
(Enable/Disable)
Subnet mask
Gateway
DNS server
addresses
(Primary, Secondary)
MAC addresses of
the EM card
Web server settings
(Enable/Disable)
SNMP settings
(Enable/Disable)
SSH settings
(Enable/Disable)
Telnet settings
(Enable/Disable)
NTP settings
(Enable/Disable)
TRUSTED HOST
settings
(Enable/Disable)
NTP server
addresses
NTP server polling
interval
N/A
A/S
N
*3
SHOW SNMP
A/O/U
Displays the setting
status of SNMP
Display Items:
System name
Location information
Contact name
Community name
(Read/Write/Trap)
Trap destination
TrapAck settings
(Enable/Disable)
N/A
A/S
N
*3
TRAPTEST
A/O
Issues the SNMP trap
for the test.
N/A
A
N
*3
Enclosure management command
DOWNLOAD
CONFIG
A
Downloads the
configuration file of
the EM firmware.
Then, EM firmware
reboots automatically
to apply the
downloaded
configuration file.
N/A
A
N
*3
FORCE
TAKEOVER
A
Switch the role of two
EM cards forcibly.
(Active/Standby)
N/A
A/S
N
*3
RESTART EM
A
Restarts the EM
firmware.
N/A
A/S
N
*3
SET
AUTOLOGOU
T
A/O/U
Specifies the time
until CLI automatically
terminates when the
CLI is left unoperated.
60 min.
A/S
N
Effective only in a
session of the
corresponding CLI.
SET DATE
A/O
Configures the date,
time and timezone of
the EM firmware.
Setting format:
MMDDhhmm{{CC}}Y
Y}
{TZ}
N/A
A/S
N
*3
Time must be configured
manually.
SET DISPLAY
EVENT
A/O/U
Enables or disables
the displaying of
certain events on the
CLI console.
“OFF”
(disabled)
A/S
N
Effective only in a
session of the
corresponding CLI.