User's Guide

74
Command
Access
rights
Description
Default value
EM card
active/
standby
Back
up
target
Notes
SET
ENCLOSURE
ASSET TAG
A/O
Configures the asset
tag of the Blade
Enclosure.
““
(unconfigured)
A
Y
*3
SET
ENCLOSURE
MACHINE
SERIAL
A/O
Configures the
machine serial
number of the Blade
Enclosure.
Factory
default
or
““
(unconfigured)
A
Y
*3
SET
ENCLOSURE
NAME
A/O
Configure the Blade
Enclosure name.
The serial
number of the
Blade
Enclosure
A
Y
*3
SET
ENCLOSURE
UID
A/O
Turns on/off the ID
LED of the Blade
Enclosure.
N/A
A
N
*4
SET POWER
POLICY
A/O
Configures the policy
of power control
function.
PERFFORMA
NCE
(performance
priority mode)
A
Y
*3
SET POWER
REDUNDANC
Y
A/O
Configures the
redundancy mode of
the power control
function.
POWER
SUPPLY
(Single power
redundancy
mode (N 1
redundancy))
A
Y
*3
SET
TIMEZONE
A/O
Specifies the time
zone of the EM
firmware.
“JST”
A
N
*3
Time zone must be
configured manually.*
SHOW ALL
A/O/U
Displays all the
configuration
information in the
enclosure.
N/A
A/S
N
SHOW
AUTOLOGOU
T
A
Displays the time until
CLI automatically
terminates when the
CLI is left unoperated.
N/A
A/S
N
SHOW
CONFIG
A/O/U
Displays the
configuration
information that is set
on the EM firmware by
the CLI command
format.
N/A
A
N
*3
SHOW DATE
A/O/U
Displays the date,
time and timeworn of
the EM firmware.
N/A
(time zone:
“JST”)
A/S
N
SHOW
DISPLAY
EVENT
A/O/U
Displays the settings
which are configured
by “SET DISPLAY
EVENT” command.
N/A
A/S
N
SHOW
ENCLOSURE
FAN
A/O/U
Displays the
information of the fan
unit(s) on the Blade
Enclosure.
Display Items:
Status
Redundancy status
Rotation speed
Part number
N/A
A
N
SHOW
ENCLOSURE
INFO
A/O/U
Displays the
information of the
Blade Enclosure.
Display Items:
N/A
A/S
N