Command Reference Guide

N8406-022A 1Gb Intelligent L2 Switch Command Reference Guide (ISCLI) 108
IGMP Snooping maintenance
The following table describes the IGMP Snooping Maintenance commands.
Table 126 IGMP Snooping Maintenance commands
Command
Usage
show ip igmp groups address <IP
address>
Shows a single IGMP Multicast group by IP address.
Command mode: All except User EXEC
show ip igmp groups vlan <1-4094>
Shows IGMP Multicast groups on a single VLAN.
Command mode: All except User EXEC
show ip igmp groups interface <port
number>
Shows IGMP Multicast groups on a single port.
Command mode: All except User EXEC
show ip igmp groups
Shows all IGMP Multicast groups.
Command mode: All except User EXEC
clear ip igmp snoop
Clears IGMP Multicast data from switch memory.
Command mode: All except User EXEC
IGMP Mrouter maintenance
The following table describes the IGMP Multicast Routers Maintenance commands.
Table 127 IGMP Multicast Group Maintenance commands
Command
Usage
show ip igmp groups vlan <1-4094>
Shows IGMP Multicast groups on a single VLAN.
Command mode: All except User EXEC
show ip igmp mrouter
Shows all IGMP Multicast routers.
Command mode: All except User EXEC
clear ip igmp mrouter
Clears IGMP Multicast router data from switch memory.
Command mode: All except User EXEC
Technical support dump
show tech-support
Command mode: All
Use the dump command to dump all switch information, statistics, and configuration for technical support.
If you want to capture dump data to a file, set the communication software on your workstation to capture session
data prior to issuing the dump commands.
FTP/TFTP technical support dump put
Use this command to put (save) the technical support dump to a FTPTFTP server.
To save dump information via TFTP, at the prompt, enter:
Switch# copy tech-support tftp
or
To save dump information via FTP, at the prompt, enter:
Switch# copy tech-support ftp
The system prompts you to enter the server IP address or hostname, and the target dump file name.