Command Reference Guide

N8406-022A 1Gb Intelligent L2 Switch Command Reference Guide (ISCLI) 16
System Information commands
The following table describes the System Information commands.
Table 6 System Information commands
Command
Usage
show snmp-server v3
Displays SNMP v3 information.
Command mode: All
show sys-info
Displays system information, including:
System date and time
Switch model name and number
Switch name and location
MAC address of the switch management processor
IP address of IP interface #1
Hardware version and part number
Software image file and version number
Configuration name
Log-in banner, if one is configured
Command mode: All
show logging messages
Displays most recent syslog messages.
Command mode: All
show access user
Displays User Access information.
Command mode: All except User EXEC
SNMPv3 Information commands
SNMP version 3 (SNMPv3) is an extensible SNMP Framework that supplements the SNMPv2 Framework by
supporting the following:
a new SNMP message format
security for messages
access control
remote configuration of SNMP parameters
For more details on the SNMPv3 architecture, see RFC2271 to RFC2276.
The following table describes the SNMPv3 Information commands.
Table 7 SNMPv3 Information commands
Command
Usage
show snmp-server v3 user
Displays User Security Model (USM) table information.
Command mode: All
show snmp-server v3 view
Displays information about view name, subtrees, mask and
type of view.
Command mode: All
show snmp-server v3 access
Displays View-based Access Control information.
Command mode: All
show snmp-server v3 group
Displays information about the group that includes the
security model, user name, and group name.
Command mode: All
show snmp-server v3 community
Displays information about the community table.
Command mode: All
show snmp-server v3 target-address
Displays the Target Address table.
Command mode: All
show snmp-server v3 target-parameters
Displays the Target parameters table.
Command mode: All
show snmp-server v3 notify
Displays the Notify table.
Command mode: All
show snmp-server v3
Displays all the SNMPv3 information.
Command mode: All