Reference Guide

N8406-022A 1Gb Intelligent L2 Switch Smart Panel Reference Guide 32
System Information Menu
Command: /info/sys
[System Menu]
snmpv3 - SNMPv3 Information Menu
general - Show general system information
log - Show last 100 syslog messages
user - Show current user status
dump - Dump all system information
The following table describes the System Information Menu options.
Table 16 System Information Menu options
Command
Usage
snmpv3
Displays the SNMP v3 Menu.
general
Displays system information, including:
System date and time
Switch model name and number
Switch name and location
MAC address of the switch management processor
IP address of IP interface
Hardware version and part number
Software image file and version number
Configuration block name
log
Displays 100 most recent syslog messages.
user
Displays the User Access Information Menu.
dump
Dumps all switch information available from the Information Menu (10K or more, depending on
your configuration).
SNMPv3 Information Menu
Command: /info/sys/snmpv3
[SNMPv3 Information Menu]
usm - Show usmUser table information
view - Show vacmViewTreeFamily table information
access - Show vacmAccess table information
group - Show vacmSecurityToGroup table information
comm - Show community table information
taddr - Show targetAddr table information
tparam - Show targetParams table information
notify - Show notify table information
dump - Show all SNMPv3 information
SNMP version 3 (SNMPv3) is an extensible SNMP Framework that supplements the SNMPv2 Framework by
supporting the following:
a new SNMP message format
security for messages
access control
remote configuration of SNMP parameters
For more details on the SNMPv3 architecture, see RFC2271 to RFC2276.
The following table describes the SNMPv3 Information Menu options.
Table 17 SNMPv3 Information Menu options
Command
Usage
usm
Displays User Security Model (USM) table information.
view
Displays information about view name, subtrees, mask and type of view.
access
Displays View-based Access Control information.
group
Displays information about the group that includes the security model, user name, and
group name.
comm
Displays information about the community table.
taddr
Displays the Target Address table.