Command Reference Guide

N8406-022A 1Gb Intelligent L2 Switch Command Reference Guide (ISCLI) 36
IGMP multicast group information
The following table describes the commands used to display information about IGMP groups learned by the switch.
Table 28 IGMP Multicast Group commands
Command
Usage
show ip igmp groups
address <IP address>
Displays a single IGMP multicast group by its IP address.
Command mode: All except User EXEC
show ip igmp groups
vlan <1-4094>
Displays all IGMP multicast groups on a single VLAN.
Command mode: All except User EXEC
show ip igmp groups
interface <port
number>
Displays all IGMP multicast groups on a single port.
Command mode: All except User EXEC
show ip igmp groups
trunk <1-40>
Displays all IGMP multicast groups on a single trunk group.
Command mode: All except User EXEC
show ip igmp groups
Displays information for all multicast groups.
Command mode: All except User EXEC
IGMP multicast router port information
The following table describes the commands used to display information about multicast routers learned through
IGMP Snooping.
Table 29 IGMP Multicast Router information commands
Command
Usage
show ip igmp mrouter
vlan <1-4094>
Displays information for all multicast groups on a single VLAN.
Command mode: All except User EXEC
show ip igmp mrouter
information
Displays information for all multicast groups learned by the switch.
Command mode: All except User EXEC
RMON Information
The following command displays general RMON information:
show rmon
Command mode: All
RMON history information
The following command displays RMON history information:
show rmon history
Command mode: All
RMON History group configuration:
Index IFOID Interval Rbnum Gbnum
----- ------------------------------ -------- ----- -----
1 1.3.6.1.2.1.2.2.1.1.24 30 5 5
2 1.3.6.1.2.1.2.2.1.1.24 30 5 5
3 1.3.6.1.2.1.2.2.1.1.18 30 5 5
4 1.3.6.1.2.1.2.2.1.1.19 30 5 5
5 1.3.6.1.2.1.2.2.1.1.24 1800 5 5