Command Reference Guide

Command Reference Guide (ISCLI) Command Reference Guide (ISCLI) 77
User Access Control configuration
The following table describes the User Access Control commands.
Table 80 User Access Control Configuration commands
Command
Description
access user <user name>
Configures the User ID.
Command mode: Global configuration
access user eject <1-10>
Ejects the selected user from the switch.
Command mode: Global configuration
access user user-
password <1-128
characters>
Sets the user (user) password (maximum of 128 characters). The user has no
direct responsibility for switch management. He or she can view switch status
information and statistics, but cannot make any configuration changes.
Command mode: Global configuration
access user operator-
password <1-128
characters>
Sets the operator (oper) password (maximum of 128 characters). The operator
manages all functions of the switch. He or she can view all switch information and
statistics and can reset ports or the entire switch.
Command mode: Global configuration
access user
administrator-password
<1-128 characters>
Sets the administrator (admin) password (maximum of 128 characters). The
super user administrator has complete access to all information and configuration
commands on the switch, including the ability to change both the user and
administrator passwords.
Command mode: Global configuration
show access user
Displays the current user status.
Command mode: All except User EXEC
User ID configuration
The following table describes the User ID Configuration commands.
Table 81 User ID Configuration commands
Command
Description
access user <1-10> level
{user|operator|administrator}
Sets the Class-of-Service to define the user‘s authority level.
Command mode: Global configuration
access user <1-10> name <1-8
characters>
Defines the user name of maximum eight characters.
Command mode: Global configuration
access user <1-10> password <1-
128 characters>
Sets the user password of up to 128 characters maximum.
Command mode: Global configuration
access user <1-10> enable
Enables the user ID.
Command mode: Global configuration
no access user <1-10> enable
Disables the user ID.
Command mode: Global configuration
no access user <1-10>
Deletes the user ID.
Command mode: Global configuration
show access user
Displays the current user ID parameters.
Command mode: All except User EXEC