Command Reference Guide

Command Reference Guide (ISCLI) Command Reference Guide (ISCLI) 99
Link to Monitor configuration
The following table describes the Link to Monitor (LtM) commands. The LtM can consist of only one uplink port
(ports 20-24) a single trunk containing only uplink ports, or a single LACP trunk containing only uplink ports. The
commands depend on the software version.
Table 118 Link to Monitor commands
Command
Description
ltm port <port number>
Adds a port to the LtM. Only uplink ports (20-24) are allowed in the LtM.
Command mode: FDP configuration
no ltm port <port number>
Removes a port from the LtM.
Command mode: FDP configuration
ltm portchannel <1-12>
Adds a trunk group to the LtM. The LtM trunk group can contain only uplink
ports (20-24).
Command mode: FDP configuration
no ltm portchannel <1-12>
Removes a trunk group from the LtM.
Command mode: FDP configuration
ltm adminkey <1-65535>
Adds a LACP trunk group to the LtM. Defines a adminkey configured to a
LACP trunk group. The LtM LACP trunk group can contain only uplink ports
(20-24).
Command mode: FDP configuration
no ltm adminkey <1-65535>
Removes a LACP trunk group from the LtM.
Command mode: FDP configuration
Link to Disable configuration
The following table describes the Link to Disable (LtD) commands. The LtD can consist of any mix of downlink ports
(ports 1-16) and trunk groups that contain only downlink ports and LACP trunk groups that contain only downlink
ports. The commands depend on the software version.
Table 119 Link to Disable commands
Command
Description
ltd port <port number>
Adds a port to the current LtD group. Only downlink ports (1-16) are allowed in
the LtD.
Command mode: FDP configuration
no ltd port <port number>
Removes a port from the current LtD group.
Command mode: FDP configuration
ltd portchannel <1-12>
Adds a trunk group to the current LtD group. LtD trunk groups can contain only
downlink ports (1-16).
Command mode: FDP configuration
no ltd portchannel <1-12>
Removes a trunk group from the current LtD group.
Command mode: FDP configuration
ltd adminkey <1-65535>
Adds a LACP trunk group to the current LtD group. Defines a adminkey
configured to a LACP trunk group. LtD LACP trunk groups can contain only
downlink ports (1-16).
Command mode: FDP configuration
no ltd adminkey <1-65535>
Removes a LACP trunk group from the current LtD group.
Command mode: FDP configuration