Reference Guide

N8406-022A 1Gb Intelligent L2 Switch Smart Panel Reference Guide 26
Table 12 Boot Management
Command
Description
Put TS Dump
Uploads the TS (tech support) dump file to the TFTP or FTP server specified in
Remote File Name.
Put Crash Dump
Uploads the core (PANIC) dump file to the TFTP or FTP server specified in
Remote Filename.
Clear Crash Dump
Deletes the core dump in flash memory.
IMPORTANT: When the switch software is changed (NormalPanel or SmartPanel) and the switch is
rebooted, the switch configuration is removed and the switch runs factory configuration block. Backup the
switch configuration if needed.