Command Reference Guide

N8406-022A 1Gb Intelligent L2 Switch Command Reference Guide (AOS) 101
Table 106 IGMP Snoop Menu options
Command
Description
clear
Removes all VLANs from IGMP Snooping.
fastlv <1-4094>
disable|enable
Enables or disables Fastleave processing. Fastleave allows the switch to
immediately remove a port from the IGMP port list, if the host sends a Leave
message, and the proper conditions are met. This command is disabled by default.
ena
Enables IGMP Snooping.
dis
Disables IGMP Snooping. This is the default.
cur
Displays the current IGMP Snooping parameters.
IGMP static multicast router configuration
Command: /cfg/l3/igmp/mrouter
[Static Multicast Router Menu]
add - Add port as Multicast Router Port
rem - Remove port as Multicast Router Port
cur - Display current Multicast Router configuration
The following table describes the Static Multicast Router Configuration Menu options.
NOTE: When you configure a static multicast router on a VLAN, the process of learning multicast routers is
disabled for that VLAN.
Table 107 IGMP Static Multicast Router Menu
Command
Description
add <port number> <1-4094> <1-2>
Selects a port/VLAN combination on which the static multicast
router is connected, and configures the IGMP version (1 or 2) of
the multicast router.
Note: Port number must be an external port (20-24).
remove <port number> <1-4094> <1-
2>
Removes a static multicast router from the selected port/VLAN
combination.
cur
Displays the current IGMP Static Multicast Router parameters.