Command Reference Guide

N8406-022A 1Gb Intelligent L2 Switch Command Reference Guide (AOS) 102
IGMP filtering configuration
Command: /cfg/l3/igmp/igmpflt
[IGMP Filter Menu]
filter - IGMP Filter Definition Menu
port - IGMP Filtering Port Menu
ena - Enable IGMP Filtering
dis - Disable IGMP Filtering
cur - Display current IGMP Filtering configuration
The following table describes the IGMP Filter Configuration Menu options.
Table 108 IGMP Filtering Menu
Command
Description
filter <1-16>
Displays the IGMP Filter Definition Menu.
port <port number>
Displays the IGMP Filtering Port Menu.
ena
Enables IGMP filtering globally.
dis
Disables IGMP Filtering globally. This is the default.
cur
Displays the current IGMP Filtering parameters.
IGMP filter definition
Command: /cfg/l3/igmp/igmpflt/filter
[IGMP Filter 1 Definition Menu]
range - Set IP Multicast address range
action - Set filter action
ena - Enable filter
dis - Disable filter
del - Delete filter
cur - Display current IGMP filter configuration
The following table describes the IGMP Filter Definition Menu options.
Table 109 IGMP Filter Definition Menu
Command
Description
range <IP multicast address> <IP
multicast address>
Configures the range of IP multicast addresses for this
filter. Enter the first IP multicast address of the ranger,
followed by the second IP multicast address of the range.
action allow|deny
Allows or denies multicast traffic for the IP multicast
addresses specified.
ena
Enables this IGMP filter.
dis
Disables this IGMP filter. This is the default.
del
Deletes this filter‘s parameter definitions.
cur
Displays the current IGMP filter.