Command Reference Guide

N8406-022A 1Gb Intelligent L2 Switch Command Reference Guide (AOS) 103
IGMP filtering port configuration
Command: /cfg/l3/igmp/igmpflt/port
[IGMP Port 17 Menu]
filt - Enable/disable IGMP Filtering on port
add - Add IGMP filter to port
rem - Remove IGMP filter from port
cur - Display current IGMP Filtering Port configuration
The following table describes the IGMP Port Filtering Configuration Menu options.
Table 110 IGMP Filtering Port Menu
Command
Description
filt enable|disable
Enables or disables IGMP Filtering on this port. The default is disabled.
add <1-16>
Adds an IGMP filter to this port.
rem <1-16>
Removes an IGMP filter from this port.
cur
Displays the current IGMP filter parameters for this port.
Domain Name System configuration
Command: /cfg/l3/dns
[Domain Name System Menu]
prima - Set primary DNS server address
secon - Set secondary DNS server address
dname - Set default domain name
cur - Display current DNS configuration
The Domain Name System (DNS) Configuration Menu is used for defining the primary and secondary DNS servers
on your local network, and for setting the default domain name served by the switch services. DNS parameters
must be configured prior to using hostname parameters with the ping, traceroute, and tftp commands.
The following table describes the Domain Name System (DNS) Configuration Menu options.
Table 111 Domain Name System (DNS) Configuration Menu options
Command
Description
prima <IP address>
Sets the IP address for your primary DNS server. Use
dotted decimal notation. For example, 192.4.17.41
secon <IP address>
Sets the IP address for your secondary DNS server. If the
primary DNS server fails, the configured secondary will be
used instead. Enter the IP address using dotted decimal
notation. For example, 192.4.17.42
dname <dotted DNS notation>|none
Sets the default domain name used by the switch.
For example: mycompany.com
cur
Displays the current Domain Name System (DNS) settings.