Command Reference Guide

N8406-022A 1Gb Intelligent L2 Switch Command Reference Guide (AOS) 24
SNMPv3 Target Parameters Table information
Command: /info/sys/snmpv3/tparam
Name MP Model User Name Sec Model Sec Level
------------------- -------- -------------------- --------- -----------
v1v2param snmpv2c v1v2only snmpv1 noAuthNoPriv
The following table describes the SNMPv3 Target Parameters Table information.
Table 15 SNMPv3 Target Parameters Table
Field
Description
Name
Displays the locally arbitrary, but unique identifier associated with this
snmpTargeParamsEntry.
MP Model
Displays the Message Processing Model used when generating SNMP messages using
this entry.
User Name
Displays the securityName, which identifies the entry on whose behalf SNMP messages
will be generated using this entry.
Sec Model
Displays the security model used when generating SNMP messages using this entry. The
system may choose to return an inconsistentValue error if an attempt is made to set this
variable to a value for a security model which the system does not support.
Sec Level
Displays the level of security used when generating SNMP messages using this entry.
SNMPv3 Notify Table information
Command: /info/sys/snmpv3/notify
Name Tag
-------------------- --------------------
v1v2trap v1v2trap
The following table describes the SNMPv3 Notify Table information.
Table 16 SNMPv3 Notify Table
Field
Description
Name
The locally arbitrary, but unique identifier associated with this snmpNotifyEntry.
Tag
This represents a single tag value which is used to select entries in the
snmpTargetAddrTable. Any entry in the snmpTargetAddrTable that contains a tag
value equal to the value of this entry is selected. If this entry contains a value of zero length, no
entries are selected.