Command Reference Guide

N8406-022A 1Gb Intelligent L2 Switch Command Reference Guide (AOS) 68
Reminders
CLI reminders prompt users to complete configuration tasks that require multiple steps. The default setting for CLI
reminders is enabled. Use the following command to disable CLI reminders: /cfg/sys/reminders dis
The following is an example of a configuration task performed with CLI reminders enabled.
>> Layer 2# vlan 5
VLAN number 5 with name "VLAN 5" created.
Reminder: VLAN 5 needs to be enabled.
>> VLAN 5# add 9
Port 9 is an UNTAGGED port and its current PVID is 1.
Confirm changing PVID from 1 to 5 [y/n]: y
Current ports for VLAN 5: empty
Pending new ports for VLAN 5: 9
Reminder: Port 9 needs to be enabled.
Reminder: VLAN 5 needs to be enabled.
System configuration
Command: /cfg/sys
[System Menu]
syslog - Syslog Menu
sshd - SSH Server Menu
radius - RADIUS Authentication Menu
tacacs+ - TACACS+ Authentication Menu
ntp - NTP Server Menu
ssnmp - System SNMP Menu
access - System Access Menu
date - Set system date
time - Set system time
timezone - Set system timezone (daylight savings)
olddst - Set system DST for US
dlight - Set system daylight savings
idle - Set timeout for idle CLI sessions
notice - Set login notice
bannr - Set login banner
hprompt - Enable/disable display hostname (sysName) in CLI prompt
bootp - Enable/disable use of BOOTP
dhcp - Enable/disable use of DHCP on Mgmt interface
reminders - Enable/disable Reminders
cur - Display current system-wide parameters
This menu provides configuration of switch management parameters such as user and administrator privilege mode
passwords, browser-based management settings, and management access list.
The following table describes the System Configuration Menu options.
Table 62 System Configuration Menu options
Command
Usage
syslog
Displays the Syslog Menu.
sshd
Displays the SSH Server Menu.
radius
Displays the RADIUS Authentication Menu.
tacacs+
Displays the TACACS+ Authentication Menu.
ntp
Displays the Network Time Protocol (NTP) Server Menu.
ssnmp
Displays the System SNMP Menu.
access
Displays the System Access Menu.
date
Prompts the user for the system date.
time
Configures the system time using a 24-hour clock format.
timezone
Configures the time zone where the switch resides. You are
prompted to select your location (continent, country, region) by the
timezone wizard. Once a region is selected, the switch updates the
time to reflect local changes to Daylight Savings Time, etc.