Command Reference Guide

N8406-022A 1Gb Intelligent L2 Switch Command Reference Guide (AOS) 81
The following table describes the SNMPv3 Target Parameters Table Configuration Menu options.
Table 76 SNMPv3 Target Parameters Table Configuration Menu options
Command
Description
name <1-32
characters>
Configures the locally arbitrary, but unique identifier that is associated with this entry.
mpmodel
snmpv1|snmpv2c|snm
pv3
Configures the message processing model that is used to generate SNMP messages.
model
usm|snmpv1|snmpv2
Selects the security model to be used when generating the SNMP messages.
uname <1-32
characters>
Defines the name that identifies the user in the USM table, on whose behalf the SNMP
messages are generated using this entry.
level
noAuthNoPriv|authN
oPriv|authPriv
Selects the level of security to be used when generating the SNMP messages using this
entry. The level noAuthNoPriv means that the SNMP message will be sent without
authentication and without using a privacy protocol. The level authNoPriv means that
the SNMP message will be sent with authentication but without using a privacy protocol.
The authPriv means that the SNMP message will be sent both with authentication and
using a privacy protocol.
del
Deletes the targetParamsTable entry.
cur
Displays the current targetParamsTable configuration.
SNMPv3 Notify Table configuration
Command: /cfg/sys/ssnmp/snmpv3/notify <notify number>
[SNMPv3 snmpNotifyTable 1 Menu]
name - Set notify name
tag - Set notify tag
del - Delete notifyTable entry
cur - Display current notifyTable configuration
SNMPv3 uses Notification Originator to send out traps. A notification typically monitors a system for particular
events or conditions, and generates Notification-Class messages based on these events or conditions.
The following table describes the SNMPv3 Notify Table Configuration menu options.
Table 77 SNMPv3 Notify Table Configuration Menu options
Command
Description
name <1-32
characters>
Defines a locally arbitrary but unique identifier associated with this SNMP notify entry.
tag <1-255
characters>
Defines a tag of 255 characters maximum that contains a tag value which is used to select
entries in the Target Address Table. Any entry in the snmpTargetAddrTable, that
matches the value of this tag, is selected.
del
Deletes the notify table entry.
cur
Displays the current notify table configuration.