Command Reference Guide

N8406-022A 1Gb Intelligent L2 Switch Command Reference Guide (AOS) 89
CIST port configuration
Command: /cfg/l2/mrst/cist/port <port number>
[CIST Port 1 Menu]
prior - Set port Priority (0-240)
cost - Set port Path Cost (1-200000000, 0 for auto)
hello - Set CIST port Hello Time (1-10 secs)
link - Set MSTP link type (auto, p2p, or shared; default: auto)
edge - Enables or disables edge port
on - Turn port's Spanning Tree ON
off - Turn port's Spanning Tree OFF
cur - Display current port Spanning Tree parameters
CIST port parameters are used to modify MST operation on an individual port basis. CIST parameters do not affect
operation of STP/PVST+.
Port parameters include:
Port priority
Port path cost
Port Hello time
Link type
Edge
On and off
Current port configuration