Command Reference Guide

N8406-022A 1Gb Intelligent L2 Switch Command Reference Guide (AOS) 98
Layer 3 configuration
Command: /cfg/l3
[Layer 3 Menu]
if - Interface Menu
gw - Default Gateway Menu
arp - ARP Menu
igmp - IGMP Menu
dns - Domain Name System Menu
cur - Display current IP configuration
The following table describes the Layer 3 Configuration Menu options. Layer 3 functionality is limited in this release.
Table 101 L3 Configuration Menu options
Command
Description
if <1-256>
Displays the IP Interface Menu.
gw <1-4>
Displays the IP Default Gateway Menu.
arp
Displays the ARP (Address Resolution Protocol) Menu.
igmp
Displays the IGMP Menu.
dns
Displays the IP Domain Name System Menu.
cur
Displays the current IP configuration.
IP interface configuration
Command: /cfg/l3/if <1-256>
[IP Interface 1 Menu]
addr - Set IP address
mask - Set subnet mask
vlan - Set VLAN number
ena - Enable IP interface
dis - Disable IP interface
del - Delete IP interface
cur - Display current interface configuration
The switch can be configured with up to 256 IP interfaces. Each IP interface represents the switch on an IP subnet
on your network. The IP Interface option is disabled by default. Interface 256 is reserved for switch management.
The following table describes the IP Interface Configuration Menu options.
Table 102 IP Interface Configuration Menu options
Command
Description
addr <IP address>
Configures the IP address of the switch interface, using dotted decimal notation.
For example, 192.2.14.101
mask <IP subnet mask>
Configures the IP subnet address mask for the interface using dotted decimal
notation. For example, 255.255.255.0
vlan <1-4094>
Configures the VLAN number for this interface. Each interface can belong to one
VLAN, though any VLAN can have multiple IP interfaces in it.
ena
Enables this IP interface.
dis
Disables this IP interface.
del
Removes this IP interface.
cur
Displays the current interface settings.
NOTE: If you enter an IP address for interface 1, you are prompted to change the BOOTP setting. Interface
256 is reserved for switch management interface.