Reference Guide

N8406-022A 1Gb Intelligent L2 Switch Browser-based Interface Reference Guide 105
Uplink Fast General Configuration
To display the following form, select Layer 2 > UpLink Fast.
The following table describes the Uplink Fast Configuration controls:
Table 86 Uplink Fast Configuration controls
Control
Description
Enabled?
Enables or disables Fast Uplink Convergence, which provides rapid Spanning
Tree convergence to an upstream switch during failover.
Note: When enabled, this feature increases bridge priorities to 65500 for all
STGs and path cost by 3000 for all external STP ports.
Update Rate (10-200)
Configures the station update rate. The default value is 40.