Reference Guide

N8406-022A 1Gb Intelligent L2 Switch Browser-based Interface Reference Guide 120
Static Multicast Router Configuration for Port
To display the following form, go to the IGMP Static Multicast Router Configuration form. Select an Mrouter
Port number, or open the IGMP Static Mrouter folder and click Add Mrouter.
NOTE: When you configure a static multicast router on a VLAN, the process of learning multicast routers is
disabled for that VLAN.
The following table describes the Static Multicast Router Configuration for Port controls:
Table 100 Static Multicast Router Configuration for Port controls
Control
Description
Mrouter Port ID
Selects a port on which the static multicast router is connected.
Note: Port number must be an external port (20-24).
Vlan ID
Selects a VLAN on which the static multicast router is connected.
IGMP Version?
Configures the IGMP version (1 or 2) of the multicast router.
Domain Name System Configuration
To display the following form, select Layer 3 > Domain Name System.
The Domain Name System (DNS) Menu is used for defining the primary and secondary DNS servers on your
local network, and for setting the default domain name served by the switch services. DNS parameters must
be configured prior to using hostname parameters with the ping, traceroute, and tftp commands.