Reference Guide

N8406-022A 1Gb Intelligent L2 Switch Browser-based Interface Reference Guide 121
The following table describes the Domain Name System Configuration controls:
Table 101 Domain Name System Configuration controls
Control
Description
Primary IP Address
Sets the IP address for your primary DNS server. Use dotted decimal notation.
Secondary IP Address
Sets the IP address for your secondary DNS server. If the primary DNS server fails, the
configured secondary will be used instead. Enter the IP address using dotted decimal
notation.
Default Domain Name
Sets the default domain name used by the switch. For example: mycompany.com.
IP Routing General Configuration
To display the following form, select Layer 3 > General.
The following table describes the IP Routing General Configuration controls:
Table 102 IP Routing General Configuration controls
Control
Description
IP Destination Re-ARP
Interval (2-120 minutes)
Sets the re-ARP period in minutes. The switch periodically sends ARP (Address
Resolution Protocol) requests to refresh its address database. This command is used for
setting the interval between ARP refreshes of the next IP address in the database. The
default interval is 10 minutes.