Reference Guide

N8406-022A 1Gb Intelligent L2 Switch Browser-based Interface Reference Guide 16
Switch Dashboard
To display the following form, select System > General. This is the default form for the switch.
The following table describes the Switch Dashboard controls:
Table 3 Switch Dashboard controls
Control
Description
Switch Name
Displays the name of the switch, as entered in Configuration > Switch > General
(SNMP).
Switch Location
Displays the location of the switch, as entered in Configuration > Switch > General
(SNMP).
Switch Type
Displays the type of switch.
Rack ID
Displays the serial number of the rack in which the switch resides.
Rack Name
Displays the name of the rack in which the switch resides.
Enclosure
Displays the serial number of the enclosure in which the switch resides.
Enclosure Name
Displays the name of number of the enclosure in which the switch resides.
Bay Number
Displays the bay number in which the switch resides.
Switch Up Time
Displays the amount of time the switch has been running.
Last Boot Time
Displays the date and time of last switch boot.
Time and date
Displays the current time and date.
Daylight Savings Location
Displays the time zone where the switch resides.
Daylight Savings Time Status
Displays the status of the daylight savings: enabled or disabled
MAC Address
Displays the MAC Address of the switch management processor.
IP Address
Displays the IP address of IP Interface.
Hardware Revision
Displays the hardware revision number of the switch.
Switch Serial No
Displays the serial number of the switch.
Hardware Part No
Not in use.
HW Spare Part No
Displays the part number of spare switch hardware.
Software Rev
Displays the software revision number.
Banner
Displays the login banner text. When a user or administrator logs into the switch, the
login banner is displayed.
It is also displayed as part of the output from the /info/sys/gen command.