Reference Guide

N8406-022A 1Gb Intelligent L2 Switch Browser-based Interface Reference Guide 18
Switch Image and Configuration Management Dashboard
To display the following form, select System > Config/Image Control.
The following table describes the Switch Image and Configuration Dashboard controls:
Table 5 Switch Image and Configuration Dashboard controls
Control
Description
Active Image Version
Displays the number of the active software image.
Next Boot Image Selection
Displays which software image (image1 or image2) will be loaded into
switch memory for the next reboot.
Image 1 Version
Displays information about the current Image 1 software. NormalPanel
is shown that the software for the Layer2 switch mode is stored in the
image.
Image 2 Version
Displays information about the current Image 2 software. SmartPanel is
shown that the software for the SmartPanel mode is stored in the
image.
Boot Version
Displays the version number of the current Boot software.
Active Configuration Block
Defines which configuration block is selected for the currently running
session.
Next Boot Configuration Block Selection
Allows the user to select the configuration block to be loaded upon the
next reboot.