Reference Guide

N8406-022A 1Gb Intelligent L2 Switch Browser-based Interface Reference Guide 26
Switch Trunk Groups Dashboard
To display the following form, select Layer 2 > Trunk Groups.
When trunk groups are configured, you can view the state of each port in the various trunk groups.
NOTE: If Spanning Tree Protocol on any port in the trunk group is set to forwarding, the remaining ports in
the trunk group will also be set to forwarding.
The following table describes the Switch Trunk Groups Dashboard controls:
Table 13 Switch Trunk Groups Dashboard controls
Control
Description
Status
For each port in the Trunk Group, shows whether the port is down (red), up and forwarding
(green) or in blocking state.
Trunk Group
Displays the numeric identifier of the Trunk Group.
Switch Port
Displays the port number of each port that is a member of the Trunk Group.
STG
Displays the Spanning Tree Group to which this trunk belongs.