Reference Guide

N8406-022A 1Gb Intelligent L2 Switch Browser-based Interface Reference Guide 80
NTP Configuration
To display the following form, select System > NTP.
This form enables you to synchronize the switch clock to a Network Time Protocol (NTP) server. By default,
this option is disabled.
The following table describes NTP Configuration controls:
Table 64 NTP Configuration controls
Control
Description
NTP Server IP Address
Configures the IP address of the primary NTP server to which you
want to synchronize the switch clock.
Secondary NTP Server IP Address
Configures the IP address of the secondary NTP server to which you
want to synchronize the switch clock.
Resync Interval (1-44640)
Specifies the interval, that is, how often, in minutes (1-44640), to
re-synchronize the switch clock with the NTP server.
Enable/Disable NTP Service
Enables or disables the NTP synchronization service.