Manualshelf

Reference Guide

ManualsBrandsNEC ManualsSwitchN8406-022A
919293949596979899100
N8406-022A 1Gb Intelligent L2 Switch Browser-based Interface Reference Guide 92
VLAN Configuration
To display the following form, go to the VLANs Configuration form. Select a VLAN ID, or open the Virtual LANs
folder and click Add VLAN.
The commands on this form configure VLAN attributes, change the status of the VLAN, delete the VLAN, and
change the port membership of the VLAN.
By default, the VLAN menu option is disabled except VLAN 1, which is enabled all the time. This switch
supports a maximum of 1,000 VLANs. VLAN 4095 is reserved for switch management.
The following table describes the VLAN Configuration controls:
Table 75 VLAN Configuration controls
Control
Description
VLAN Name
Assigns a name to the VLAN or changes the existing name. The default VLAN name is
the first one.
VLAN ID (1-4095)
Assigns a numeric identifier to the VLAN.
VLAN State
Enables or disables the VLAN.
Spanning Tree Group
Assigns a VLAN to a Spanning Tree Group.
Ports Available
Lists the ports that can be added to the VLAN.
Ports in Vlan
Lists the ports that are members of the VLAN.
Select a port number in the Ports Available list and click Add to add the port to the VLAN
membership.
Select a port number in the Ports in VLAN list and click Remove to remove the port from
the VLAN membership.